Trip Around the World tutorial 1

 Trip Around the World tutorial 1

I will be using parts of my hand out sheets when I taught this class over 100 times, to do this tutorial.

Back in the 1990s, before mattresses were 11" - 15" thick, my measurements were good.  Now if you are actually making a bed quilt, you might have to add 2 or 3 borders to these sizes.  The chart is at the end of this post. To use my directions you need to have an even number of fabrics.

After you decide on the order of your fabrics, take a photo to refer back to before sewing.

Cut the required number of strips for the size quilt you are making.  Try cutting 2 to 4 fabrics at the same time with the lightest color on top.

Referring to your photo of the fabrics in order, sew the number of strata required for your quilt.  If you have a walking foot, you can sew from the same end each time.  Without a walking foot, you might want to sew from opposite ends each time to prevent a curve in the strata. Always keep one end of the strata as even and lined up as you can.  Let the mismatched lengths all be at the other end.

 Press the seams one up, one down all through the strata.  Make sure each strata is pressed identically (with the same fabrics going in the same direction as the first strata).

You can just do a quick press from the wrong side to set the seams in the right direction and do the heavier pressing from the right side to make sure you don't have any pleats at the seam lines.

(Now, before I add a yardage chart, the pieces in my rectangular TAW quilts are rectangular, not square.  It isn't obvious when you first look at it.  Rectangular pieces make it possible to have the same fabric touching the center of all 4 sides. If you use squares on a rectangular quilt, you will end up making extra rows for the top and bottom of the quilt and the top and bottom of the main diamond created won't touch top and bottom edges.)

 All yardages are generous so there is enough to recut a strip if you have a miscut.

Wall quilt  34 ½” square before borders

          12 fabrics, ¼ yard of each,

cut 3 strips 2” wide from each fabric ( across the 44”width)

          crosscuts in sewn strata will be 2”

 

Baby quilt  34 ½”x 46” without borders – border optional

          12 fabrics, 1/3  yard  of each

          cut 3 strips 2 ½” wide from each fabric (across the 44”width)

          crosscuts in sewn strata will be 2”

 

Couch/Lap quilt  54” x 67.5” - borders optional

          14 fabrics, 1/2 yard of each

          cut 4 strips 3” wide from each fabric (across the 44” width)

          crosscuts in sewn strata will be 2 ½”

 

Twin size quilt  62” x 93” without  borders

          16 fabrics, ½ yard of each

          cut 4 strips 3½” wide from each fabric (across the 44”width)

          crosscuts in sewn strata will be 2 ½”

 

Optional twin size quilt 70” x 96 ¼”

          18 fabrics, 5/8 yard of each

          Cut 5 strips 3 ¼” wide from each fabric (across the 44” width)

          Crosscuts in sewn strata will be 2 ½”

 

Double/Queen quilt  78” x 97 ½” before borders

          20 fabrics, 5/8 yd. of each

          cut 5 strips 3” wide from each fabric (across the 44” width)

          crosscuts in sewn strata will be 2 ½”

 

King size quilt          107 ½” square before borders

          22 fabrics, 3/4 yd. of each

          cut 7 strips 3” wide from each fabric (across the 44” width)

          crosscuts in sewn strata will be 3”

If you have questions (and don't have a link to your email address in your blogger account), my email address is on my right side bar (on a phone I think you can click on the title of the blog post to see the right side bar, or scroll down and click on see web version).

 My guest bed quilt.

Coming in Tutorial 2, sewing the stratas into tubes.